Filter by max / min temp
The information provided on this website is given in good faith and is to be used for customer assistance only, and without liability on the part of the company. Please contact Flexitallic Application Engineering for technical assistance.
Metal-wound gasket designed to deliver a seal with the most dynamic recovery, with PTFE filler material.
The Change™-HF is suitable for use in HF-Alky service.
Metal-wound gasket designed to deliver a seal with the most dynamic recovery, with Thermiculite 835 filler.
Spiral Wound Gasket Style CG with internal ring for an additional compression limiting stop, with Flexible Graphite filler material.
Corriculite® is a spiral wound gasket filler material suitable for use in corrosion management.
BX ring type joints incorporate a pressure passage hole to allow for pressure equalization each side of the sealing faces.
Style R ring type joints are manufactured in both oval and octagonal configurations.
Modified R-oval or R-octagonal with inner section matched to the bore.
Easy subsea installation with integrated removeable handle. Use to connect to RTJ and RF flanges.
Spiral Wound Gasket Style CG with internal ring for an additional compression limiting stop, with PTFE filler material.
Style 625 for clamp-type and other non-standard flange assemblies.
Spiral Wound Gasket utilising an external ring which accurately centers gasket on flange face, with PTFE filler material.
Style PN Flexpro™ Kammprofile is used in confined locations, including male and female, tongue and groove and/or recessed flange arrangements, with PTFE Filler
Style ZG Flexpro™ Kammprofile utilises an integral outer locating ring for correct gasket positioning within the mating flange bolt circle, with PTFE Filler.
Style ZA Flexpro™ Kammprofile has a loose fitting outer location ring which is often preferred where flange differential radial thermal expansion may be encountered with PTFE Filler.